Awning Part 2 Installing The Brackets Of The Fiamma F65 S For
In order to grant maximum comfort and complete safety the new 12Vcc electric awning can be easily opened by a switch inserted in the wall of the vehicle. The Fiamma F65 Eagle Legless Roof Mount Awning(excluding the Fiamma F65 Eagle 66) comes complete with Wind Detective System: a wind sensor that automatically activates the 12Vcc motor and closes the awning in case of strong wind, avoiding possible damages. The Fiamma F65 Eagle Awning Electric Motor Kit (98669-02)also allows manual closing in case of emergency. The self-supporting arms are reinforced thanks to the innovative and sturdy duralumin Double Block that doesn’t require the use of support legs. The angle of inclination of the arms is prefixed at 10 degrees, but can be changed according to the height of your van from 5 to 17 degrees, enabling the correct flow of the water.
The Fiamma F65 Eagle awnings are self-supported so they don’t need legs. They also come with a built-in 12 volt DC motor (Fiamma F65 Eagle Awning Electric Motor Kit (98669-02)) for automatic deployment. These two features make these awnings super easy to use. In addition, they have a wind sensor that will automatically close the awning in high winds.
The angle at which the Fiamma F65 Eagle awning comes out from the case is set to 10 degrees at the factory but can be adjusted from 5 to 17 degrees to set your preferred angle and match the relative height of the vehicle for the best rain run off angle.
Fiamma F65 Eagle Legless Roof Mount Awning For Camper Vans
Important: Verify with your if your camper van is suitable for the installation of the F65 Eagle. The vehicle must be robust enough to support the weight and the tension of the open awning. Fiamma refuses all responsibility for damages to the vehicle or for water ingress due to incorrect installation or due to installations on weak roofs.
The Fiamma F65 Awning is designed to mount to the roof of a vehicle. If you want an awning that mounts to the side of a vehicle or a roof rack, you will need to order the Fiamma F45S Awning. We sell custom camper van roof racks that are specifically made to go around roof-mount awnings if you prefer that option.
In order to grant maximum comfort and complete safety the new 12Vcc electric awning can be easily opened by a switch inserted in the wall of the vehicle. Standard delivered with Wind Detective System: wind sensor that automatically activates the 12Vcc motor and closes the awning in case of strong wind, avoiding possible damages. The motor kit also allows manual closing in case of emergency. The self-supporting arms are reinforced thanks to the innovative and sturdy duralumin Double Block that doesn’t require the use of support legs. The angle of inclination of the arms is prefixed at 10 degrees, but can be changed according to the height of motorhome from 5 to 17 degrees, enabling the correct flow of the water. The installation brackets are optional available.
Privacy Ultra Light
Mentioned prices are suggested retail prices, Vat, Installation, Duties and Transport cost excluded.Standard delivered with: 12V motor, wall switch and wind sensor. Brackets and LED not included.
Important: verify with your trusted dealer if your motorhome or camper van is suitable for the installation of the F65eagle. The vehicle must be robust enough to support the weight and the tension of the open awning. Fiamma refuses all responsibility for damages to the roofs or for water ingress due to incorrect installation or due to installations on weak roofs
The F65 Eagle awning requires a full-length bracket that mounts directly to the van roof, so the OEM rails must to removed prior to installation.
Fiamma F80s Awning With Titanium Case 3.2m (10'6\
The Fiamma F65 Eagle Awning Electric Motor Kit (98669-02) allows for manual operation in override mode. This integrated Motor Kit doesn’t increase the total length of the awning and is installed at the factory when you order the awning!
Fiamma Awning LED Light Kit for the F45S & F65 awnings, consisting of a 5m LED strip. Supplied as standard with 10 PVC 20″ (50cm) lenses to fit inside the internal profile of the lead bar (for both F80S and F65 awnings) and inside the case (for F45S).
This is a very convenient form of lighting for external use on the F45S and F45L awnings. This kit consists of 6 individual strips that slide together below the awning in to the rear channel. This means that you don’t have to have the awning open in order to enjoy the illumination. It’s also possible to travel with the LED installed on the awning case.
Telescopic Crank Handle For Fiamma F45, F65 & F80s Awnings
F65 Eagle 66 (6 Foot 6 Inch) White 05810-13R, F65 Eagle 319 (10 Foot 6 Inch) White 07755F01R, F65 Eagle 319 (10 Foot 6 Inch) Titanium 07756F15R, F65 Eagle 369 (12 Foot 2 Inch)White 07755G01R, F65 Eagle 399 (13 Foot 9 Inch)White 07755H01R, F65 Eagle 400 (13 Foot 9 Inch)White 07755C01R, F65 Eagle 400 (13 Foot 9 Inch)Titanium 07756F15R, F65 Eagle 400 (13 Foot 9 Inch)Black 06880C01R
[video width="1920" height="1080" mp4="https:///wp-content/uploads/2022/08/Fiamma-Corporate-Video.mp4"][/video] Fiamma is known worldwide as a pioneer and a leading company in manufacturing technical accessories for the recreational vehicle market. Fiamma has more than 100 patents registered in Europe, USA, Japan and Taiwan. The headquarters in Cardano al Campo, Italy focuses on product design and worldwide distribution. In addition there are eight manufacturing facilities where product improvements, technology innovation and new production processes are constantly implemented. Nomadic Supply Company is proud to be the largest authorized Fiamma dealer in North America.
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go toP65Warnings.ca.gov.
Post a Comment for "Awning Part 2 Installing The Brackets Of The Fiamma F65 S For"